5 Glenmore Business Park, Swindon SN5 7FP
Mon-Fri: 08:00-17:00
01793 615171
Swindon, SN5 7FP
Image link

WHEN DOWNTIME IS NOT AN OPTION

CHOOSE MAINTENANCE FREE BEARINGS

SELF-LUBRICATING COMPONENTS
FOR CIVIL ENGINEERING & INFRASTRUCTURE

Civil engineering and infrastructure applications face demanding conditions – heavy loads, weather exposure, moisture, dirt and repeated movement. Conventional lubricated components can suffer from lubricant loss, contamination and accelerated wear. Frequent servicing can be challenging in hard-to-reach locations, such as bridges, cranes, dams and flood-control systems, potentially requiring infrastructure to be taken out of service for maintenance.

SANKYO OILLESS components address these challenges using specialised alloys, including bronze and steel-based materials, combined with embedded solid lubricants. During sliding, the lubricant transfers to the mating surface, forming a lubricating film that reduces friction and wear. This can extend component service life, reduce reliance on continuous oil or grease application, lower maintenance requirements and minimise infrastructure disruption.

Problem:

Particle Trapping: In environments with airborne grit, ash, sand, or metal dust, liquid grease acts as a magnet for contaminants, forming an abrasive grinding paste that rapidly destroys bearing surfaces.

Solution:

Dry, Non-Sticky Surface: Running dry or maintenance-free prevents abrasive dust from adhering to the sliding interface.

Particle Accommodation: Minor dust or ash particles get embedded or wiped harmlessly into the solid lubricant matrix pockets rather than grinding down the shaft mating surface or blocking lubricant feed lines.

Problem:

Oil Film Breakdown: Extreme static or fluctuating loads squeeze out liquid lubricants, leading to metal-to-metal contact, galling, scoring, and seizure.

Deformation or Brinelling: Traditional needle, roller, or ball bearings deform, dent, or fail prematurely under high-impact shock loads or heavy press operations.

Solution:

Continuous Lubricant Transfer: Under high contact pressure, solid lubricant (graphite plugs) transfers onto the mating surface, maintaining a micro-thin lubricating film even when static or undergoing heavy load spikes.

High-Strength Base Alloys: Made from high-tensile brass, aluminum bronze, or special copper alloys, these bearings absorb extreme static loads (e.g., SO#50SP series) without brinelling or permanent deformation.

Problem:

Lubricant Washout: Exposure to water, sea water, chemical solutions, or high-pressure washdowns strips away conventional oil or grease.

Corrosion & Rust: Moisture and corrosive agents attack standard carbon steel bearings and shaft journals.

Solution:

Inherent Water Resistance: Solid lubricant plugs are chemically stable and cannot be washed away by liquid immersion or chemical spray.

Corrosion-Resistant Matrix: The non-ferrous bronze and brass base matrices do not rust, making them ideal for underwater, marine, and chemical application environments (e.g., incinerator pushers, gate valves, damp processing lines).

Problem:

Relubrication Neglect: Bearings located in hard-to-reach, dangerous, or enclosed machinery (e.g., large press dies, hydraulic dams, continuous casters) often miss regular greasing schedules, leading to sudden failure.

Lubrication Networks: Automatic lubrication systems (lines, pumps, injectors) add design complexity, material costs and potential points of mechanical failure.

Solution:

Maintenance-Free Operation: Self-lubricating design eliminates routine manual greasing and maintenance intervals entirely.

Simplified Engineering Design: Machinery designers can eliminate grease grooves, oil ports, pumps, and tubing networks, significantly cutting total cost of ownership and design hours.

Problem:

Oil Leakage & Staining: Dripping oil or migrating grease stains finished goods or degrades surrounding work environments in sensitive applications like automotive stamping, food manufacturing, packaging, or cleanroom equipment.

Solution:

Clean, Oil-Free Operation: Completely dry operation prevents fluid drips, oil mist, or airborne contamination, preserving product appearance and maintaining a cleaner work environment.

Image link

SANKYO OILLESS
MATERIALS

SANKYO OILLESS manufacture a range of base alloys with embedded lubricants or oil sintered material which can be specified to suit the challenges of your application. These include:

Image link

General, heavy-duty / ambient
Base alloy and solid lubricant work together.

Image link

Wet / Underwater / Seawater
Alternative lubricant system for a different environment; subject to engineering review.

Image link

Elevated Temperatures
Temperature suitability depends on base alloy, lubricant and duty cycle.

Image link

Impact / Abrasion / Custom Motion
Material, fit, countersurface and movement must be assessed together.

SOLID LUBRICANTS

Graphite-based, PTFE-based and other approved formulations are embedded into the base metal. These generate a consistent, reliable film which lubricates the path of the mating surface.

Image link
Image link

PRODUCT
GEOMETRIES

SANKYO sliding material is available in a huge range of formats and sizes, including:

Image link
STROKE PLATES

Where controlled linear movement, high loads and reliable sliding performance are essential such as specialised construction machinery, lifting systems, movable structures and heavy-duty hydraulic equipment face challenges from corrosion, lubricant washout, vibration and particle ingress. SANKYO OILLESS stroke plates reduce friction and wear, whilst eliminating manual lubrication requirements.

Image link
GUIDE BUSHES

SANKYO OILLESS guide bushes are used to support high-load, low-speed oscillating and rotational actions in a wide range of infrastructure projects such as dam gates, construction machinery, hydraulic lifting systems and offshore equipment. Conventional bushes can suffer from friction, wear and lubricant breakdown, particularly in environmentally exposed installations. SANKYO OILLESS guide bushes are made of corrosion resistant alloys and incorporate embedded solid lubricants that transfer to the mating surface during movement, reducing friction and offering long service life in correctly specified applications.

Image link
SLIDE PLATES

When heavy structural or mechanical components need to slide under under heavy loads, surfaces experience friction and wear exacerbated by environmentally driven lubricant breakdown. SANKYO OILLESS slide plates use embedded solid lubricants to reduce friction and wear, helping improve operational reliability and reducing the need for maintenance interventuons.

Image link
THRUST WASHERS

SANKYO OILLESS thrust washers support axial loads in infrastructure equipment, including dam gates, hydroelectric machinery, hydraulic lifting systems and movable bridge mechanisms. Conventional lubricated washers can suffer from lubricant degradation, contamination and wear, increasing maintenance requirements. SANKYO’s specialised alloys with embedded solid lubricants reduce friction and reliance on external lubrication, helping extend component life and minimise servicing. This is particularly valuable in heavy-duty equipment operating in exposed environments or difficult-to-access locations.

Image link
BEARING UNITS

SANKYO OILLESS bearing units can support rotating shafts in infrastructure equipment, including hydroelectric machinery, water-treatment systems, pumping stations and construction equipment. Conventional lubricated bearings can suffer from moisture ingress, contamination and lubricant degradation, accelerating wear and increasing maintenance. SANKYO’s specialised alloys with embedded solid lubricants reduce friction and reliance on external lubrication, helping improve reliability and reduce servicing requirements. This is particularly beneficial in heavy-duty equipment operating in harsh environments or locations where maintenance access is limited.

Image link
CUSTOM MADE COMPONENTS

SANKYO OILLESS custom made rotation and milled parts give you all the benefits of SANKYO’s trademark resistant alloys and maintenance free lubrication, applied to any feasible application. These can be custom modifications to standard parts, or fabricated components from scratch for specialist applications. The possibilities are endless. Submit drawings, load cases and operating conditions for an appraisal & quote.

WHERE SILENT BEARING COSTS APPEAR

Maintenance Hours
How many maintenance hours are spent on greasing, inspection and cleaning each month?

Service Life
Do you have bearings installed where service life is 1-2 years or hard to predict under heat, dust, high-load or water?

Planned Shutdowns
How much planned shutdown time is used for bearing replacement every year?

Failure
Have you experienced bearing seizure, roller blockage or damage to the roller, shaft or housing?

SEND US YOUR
TOUGHEST BEARING PROBLEM

Get a technical review for your toughest applications

Image link
Share

Send us photos, drawings, operating conditions or worn parts.

Review

We select suitable SANKYO OILLESS bearings and estimate lifetime benefits.

Plan

We support installation, condition checks and future procurement planning.



    Less risk. Longer life. Lower maintenance.

    SBL Services are Exclusive UK Distributors of SANKYO OILLESS